How To Measure A Roof For Shingles From The Ground

Admin June 20, 2022

It's possible to get the size of your roof without a ladder. You'll save a lot of time if you know how to measure a **roof for shingles** from the ground.

Additionally, it is far more secure. You will be able to better plan for the cost of replacing a roof by using the roof size estimate. You can create a budget for the project and price the shingles and other supplies you will need. If you are on the market for a new home and come across a property that has a damaged roof, using this method gives you a simple way to estimate future material expenses. If you wish to make an offer on the property, the information might help you understand the anticipated costs of repairs.

**Techniques for How to Measure a Roof For Shingles From the Ground**

**For rectangular roof sections:**

- When it comes to conventional gable roofs with rectangular sections, you can
**count the shingles**and determine the section size by using this method. This works because 3-tab shingles have a width of around 12 inches and a height of approximately 6 inches. - Counting from the left to the right, determine how many shingles are lined up in a row.
- The width of the section is denoted in feet by the number of shingles.
- Make a note of the width measurement.
- From the gutter up to the pinnacle, count the number of shingles rows there.
- When you get the number of rows, divide it by two to get the height of the section in feet.
- Take notes on the height measurement.
- To get the section's total square footage, multiply the width by the height.
- Proceed to count the shingles in each part of the roof using the procedure described above.
- To get the overall square footage covered with shingles, just add up the individual square footage for each area.

>>Related post: **A Beginner's Introduction To CRM Software Platforms**

**When it comes to dormers and other triangular roof sections:**

- Take a count of the shingles that span the segment of the triangle that is the broadest.
- Take note of that breadth measurement in feet. Write it down.
- Start counting from the gutter or the lowest point on the roof and work your way up to the highest position.
- Take note of that figure, which represents the height in feet.
- Take the width times the height.
- The final number will be an underestimate of the actual square footage, but it will provide a somewhat accurate estimation of the number of shingles that will be required.

>>Related post: **An Overview of the Benefits of Using a Roofing Software System**

**For hip roofs:**

- Learning how to measure a roof from the ground demands a different strategy when dealing with hip roofs because of their unique shape.
- Take out your tape measure and start by measuring the length of the home, followed by the breadth.
- Take careful notes on the dimensions.
- Perform a length-by-width calculation.
- Increase the number obtained by a factor of 1.35.
- Take the answer to that calculation and use it as your estimate for the total square footage of the hip roof.

previous post

next post

Relative Posts

Search

Top most viewed